How to Use Qwik Seal

---

Sprung a leak or punctured a pipe? Qwik Seal is simple and easy to use.  

Installation Instructions:

1) Clean area around the leak

2) Place seal over the area around the leak

3) Attach clamp over center of seal

4) Fasten screw tightly 180 degrees from seal, then torque

** Clamps fitting pipe sizes 1/2" to 3-1/4" torque to 30 inch pounds

*** Clamps fitting pipe sizes 3-1/2" to 12" torque to 50 inch lbs.

Note: If the pipe has a rough surface, a small amount of lubrication on the O-ring may allow it to con